RC Helicopter
Direct purchase from the factory 
1.You can contact the customer service. for any question regarding the product.
2.Ask the question in English to get answer faster.
3.Keep your question short and to the point.
Questions:0/2000
JUNTEK PSG9080 1nHz-80MHz Signal Generator Dual Channel Programmable Function Arbitrary Wave Source Frequency Modulation Amplitude Modulation Voltage Control Frequency Meter
1539
Shipping to: United States |
Express delivery: 7-12 business days |
Standard delivery: 15-25 business days
ደህንነቱ የተጠበቀ ክፍያ
ነፃ ስጦታ
የመላኪያ ፖሊሲ
የመመለሻ ፖሊሲነፃ ስጦታ
እንኳን ወደ Roymall በደህና መጡ፣ ለከፍተኛ ደረጃ የስጦታ መደብር ስጦታዎች የሚገዙበት ሙያዊ ድረ-ገፃችን። ድጋፍዎን ከፍ ብለን እናደርገዋለን እናም በእያንዳንዱ ግዢዎ ላይ ተጨማሪ ደስታ በማክበር አመስጋኝነታችንን ለመግለጽ እንፈልጋለን። ከእኛ ጋር በሚገዙበት ጊዜ፣ የሕይወት ደረጃዎን የሚያሻሽሉ ከፍተኛ ጥራት ያላቸውን ምርቶች ብቻ ሳይሆን እያንዳንዱን ትዕዛዝ የሚያገኙበትን ልዩ ነፃ ስጦታም ያገኛሉ። ስብስባችንን ለመጎብኘት እና ፍጹም ስጦታዎችዎን ለማግኘት ዝግጁ ነዎት? የከፍተኛ ደረጃ የስጦታ መደብር እቃዎችን ይምረጡ፣ ትዕዛዝዎን ያቅርቡ እና ከግዢዎ ጋር የሚመጣውን የነፃ ስጦታዎ ደስታ ይጠብቁ።የመላኪያ ፖሊሲ
ትዕዛዞችዎን ከተቀበልን በኋላ እቃዎችን ወደእርስዎ ለማድረስ እና በሰላም እንዲደርሱ እንሰራለን። የመላኪያ ዝርዝሮች በማረጋገጫ ኢሜልዎ ውስጥ ይሰጣሉ።በአብዛኛዎቹ ሁኔታዎች፣ ትዕዛዞች በ2 ቀናት ውስጥ ይቀርባሉ።በልዩ ሁኔታዎች፣ እንደሚከተለው ይዘገያል፡ ትዕዛዝን ቅዳሜ፣ እሑድ ወይም በዓላት ላይ ሲያቀርቡ፣ ለ2 ቀናት ይዘገያል..በአብዛኛው፣ ያለ የበረራ መዘግየት ወይም ሌሎች የአካባቢ ሁኔታዎች ተጽዕኖ ሳይኖርበት 5-7 የስራ ቀናት (ሰኞ እስከ ዓርብ) ይፈልጋል..የመላኪያ አገልግሎታችን በዓለም ዙሪያ ስለሆነ፣ የመላኪያ ጊዜዎች በአካባቢዎ ላይ የተመሰረቱ ስለሆኑ በርቀት ያሉ አካባቢዎች ወይም ሀገሮች ውስጥ ከሆኑ ጥቂት ጊዜ ይፈልጋል እና በትዕግስት ይጠብቁ።1. መመለሻ እና መለዋወጫ ፖሊሲ
እቃዎችን ከ roymall.com ብቻ እንቀበላለን። ከአካባቢያችን አከፋፋዮች ወይም ሌሎች ነጋዴዎች ከገዙ፣ ከእኛ ጎን መመለስ አይችሉም። የመጨረሻ ሽያጭ ዕቃዎች ወይም ነፃ ስጦታዎች ለመመለስ አይቀበሉም። ለመመለስ ብቁ ለመሆን፣ ዕቃዎ ያልተጠቀሙበት እና እንደተቀበሉት በተመሳሳይ ሁኔታ ውስጥ መሆን አለበት። እንዲሁም በዋናው ማሸጊያ ውስጥ መሆን አለበት።ከእኛ የመመለሻ መመሪያዎችን ከተቀበሉ በኋላ፣ የተመለሱ ዕቃዎችዎን ያሸጉ እና ጥቅልዎን በአካባቢያችሁ ፖስታ ቤት ወይም ሌላ ኩሪየር ላይ ያስቀምጡ።የተመለሰውን ወይም የተለወጠውን ዕቃ በ3-5 የስራ ቀናት ውስጥ ከተቀበልን በኋላ እንሰራለን። መመለሻው በራስ-ሰር ወደ ዋናው የክፍያ ዘዴዎ ይመለሳል።ምርቱ ልዩ ከተሰራ፣ ልዩ መጠን፣ ልዩ ቀለም ወይም ልዩ ህትመት ጨምሮ፣ �ንዳንድ መመለስ ወይም መለወጥ አይችልም።ተጨማሪ እርዳታ ከፈለጉ፣ እባክዎን ያግኙን። service@roymall.com ወይም Whatsapp: +447549870296
2.የመመለሻ ፖሊሲ
የተመለሰውን ጥቅል ከተቀበልን እና ከተፈተነ በኋላ ሙሉ መመለሻ ወይም 100% የማከማቻ ክሬዲት ያገኛሉ። መመለሻው በራስ-ሰር ወደ ዋናው የክፍያ ዘዴዎ ይመለሳል። እባክዎን ያስታውሱ የመላኪያ ወጪዎች እና ማንኛውም ታክስ ወይም ክፍያዎች መመለስ አይቻልም። ተጨማሪ የመላኪያ ወጪዎች ጥቅሉ ከተላከ በኋላ መመለስ አይቻልም። እነዚህን ክፍያዎች ለመክፈል እርስዎ ተጠያቂ ነዎት እና ትዕዛዙ ወደእኛ ከተመለሰም ሊሰረዙ ወይም መመለስ አይችሉም።ከተመለሰው ዕቃ ከተቀበልን እና ከተረጋገጠ በኋላ፣ የተመለሰውን ዕቃ እንደተቀበልን ለማሳወቅ ኢሜይል እንልካለን። እንዲሁም የመመለሻዎ መፈቀድ ወይም ማያያዣ ስለሆነ እናሳውቅዎታለን።በመመለሻ ሂደቱ ላይ ችግር ካጋጠመዎት፣ እባክዎን ያግኙን። service@roymall.com ወይም Whatsapp: +447549870296Features:
- Programmable output: The type of waveform output (such as sine wave, square waves, triangle wave, arbitrary wave, etc.), output time, and output sequence can be freely formulated to realize automatic work.
- Firmware update in real time: Firmware upgrade can be updated at any time to fix bugs, or used for your special customization needs. Press the corresponding soft key to confirm entering the update mode, and perform a one-key firmware upgrade by connecting with the PC software.
- Voltage-controlled adjustment: The frequency, amplitude and duty cycle of the output can be controlled by an external analog voltage signal to achieve voltage-controlled sweeping frequency, sweeping amplitude and sweeping duty cycle, which are widely used in industrial debugging.
- Modulation function: The modulated waveforms can be output in single channel or dual channel. Modulation: The process of adding information from a signal source to the carrier to make it suitable for channel transmission. It is the technology that makes the carrier wave change with the signal.
- High sampling rate: The sampling rate of up to 300MSa/s can obtain more waveform data per unit time, thus making the displayed waveform more accurate.
- Personal color: In order to meet the personalized needs of customers, four color schemes for the system are provided. You can use the numeric keys and knob to select the desired system color, press the soft key save to save the selected color.
- Equivalent performance dual channel output: The same or different function signals or arbitrary waveform signals can be output simultaneously; all parameters can be adjusted independently, the phase difference between the two channels is continuously adjustable from 0 to 359.9 degrees; the signal frequency can be up to 80MHz, and the output signal can be within 1MHz up to 25Vpp.
- Burst function: Sine wave, square waves, saw tooth wave, or arbitrary wave can be used to generate burst signals, the number of periods is continuously adjustable between 1-1000000000.
- The pulse width can be adjusted accurately: The pulse width and the pulse period time of the pulse wave are digitally and accurately adjustable, enabling a wide range of pulse waveforms to be accurately set without jitter output.
- Can draw arbitrary waveform: PC software and communication protocol are provided for free, arbitrary waveforms can be drawn using the PC software; using the communication protocol can be secondary development programming; all functions of the instrument can be controlled by the PC software (The instrument can be also finished all operations without connecting to the computer.)
- Widely used: Scientific research and technical engineering, factory electronic instrument testing, electronic instrument maintenance, school experiment teaching, electronic design competition, etc.
Specification:
Model: | PSG9080 |
Channel: | 2 |
Sampling rate: | 300MSA/S |
Maximum frequency of sine wave: | 80MHz |
Waveform characteristics | |
Wave length: | 8192 points/channel |
Waveform vertical resolution: | 14 bits |
Waveform type: | Sine wave, square waves, pulse wave (duty cycle, pulse width and cycle time can be accurately set), triangle wave, rising saw-tooth wave, falling saw-tooth wave, CMOS wave, DC level, half wave, full wave, positive step wave, inverse step wave, exponential rise, exponential fall, Lorentz pulse wave, muti-sound wave, random noise wave, trapezoidal pulse wave, sink pulse wave, amplitude modulation waveform, frequency modulation waveform and 99 groups of user-defined wave-forms. |
Frequency characteristics | |
Sine wave frequency range: | 1nHz-80MHz |
Square waves frequency range: | 1nHz-30MHz |
Triangle wave frequency range: | 1nHz-50MHz |
Pulse wave frequency range: | 1nHz-30MHz |
TTL digital wave frequency range: | 1nHz-20MHz |
Arbitrary wave frequency range: | 1nHz-50MHz |
Pulse width adjustment range: | 5nS~4S |
Pulse period adjustment range: | 10nS~40S |
Frequency minimum resolution: | 1nHz |
Frequency accuracy: | ±5ppm 0 to 50℃ |
Frequency stability: | ±3ppm per 1 year |
Sine wave spectral purity: | Total harmonic distortion: ≤0.5%(@1kHz, 5Vpp) |
Signal characteristics | |
Square waves | |
Rising/falling edge time: | ≤10nS |
Overshoot: | ≤10% |
Asymmetry: | ≤0.1% |
Ramp and triangle wave | |
Linearity: | ≤1%(less than 1MHz) |
Asymmetry: | ≤1%(less than 1MHz) |
Pulse wave | |
Pulse width: | 5nS~4S |
Pulse period: | 10nS~40S |
Duty cycle: | 0.01%-99.99% |
Rising/falling edge: | ≤10nS |
Overshoot: | ≤10% |
Arbitrary wave | |
Wave length: | 8192 points (8K points) |
Vertical resolution: | 14 bits |
Minimum rise/fall time: | ≤10nS |
Overshoot: | ≤10% |
Arbitrary waveform non-volatile storage number: | 99 |
Output characteristics | ||||
Amplitude | ||||
Amplitude range: | Frequency≤1MHz | 1MHz≤Frequency＜11MHz | 11MHz≤Frequency＜60MHz | 60MHz≤Frequency＜80MHz |
2mVpp~25Vpp | 2mVpp~10Vpp | 2mVpp~5Vpp | 2mVpp~3.6Vpp | |
Amplitude resolution: | 1mVpp | |||
Amplitude stability: | ±1% ±1 mVpp (@ 1 kHz, >10 mVpp) | |||
Amplitude flatness: | ±1%(0.1dB)<10MHz | |||
±2%(0.2dB)<10MHz~50MHz | ||||
±10%(0.9dB)<50MHz~70MHz | ||||
±20%(1.9dB)<70MHz~80MHz | ||||
DC bias | ||||
Adjustment range: | -9.99V-15.00V | |||
Resolution: | 0.01V | |||
Phase characteristics | ||||
Phase adjustment range: | 0°-359.9° | |||
Phase resolution: | 0.1° | |||
Waveform output | ||||
Output impedance: | 50Ω (nominal) | |||
Protection: | short circuit protection | |||
Modulation characteristics:
Modulation type: AM, FM, PM, ASK, FSK, PSK, PWM
AM:
Carrier wave: sine wave, square waves, saw-tooth wave, arbitrary wave (except DC)
Modulation source: internal/external
Modulated wave: sine wave, square waves, saw-tooth wave, noise wave, arbitrary wave
Modulation depth: 0% to 200%
Modulation frequency: 1mHz to 1MHz
FM:
Carrier wave: sine wave, square waves, saw-tooth wave, arbitrary wave (except DC)
Modulation source: internal/external
Modulated wave: sine wave, square waves, saw-tooth wave, noise wave, arbitrary wave
Modulation frequency: 1mHz to 1MHz
Frequency deviation: 0.1Hz to 10kHz
PM:
Carrier wave: sine wave, square waves, saw-tooth wave, arbitrary wave (except DC)
Modulation source: internal/external
Modulated wave: sine wave, square waves, saw-tooth wave, noise wave, arbitrary wave
Phase deviation: 0°to 360°
Modulation frequency: 1mHz to 1MHz
ASK:
Carrier wave: sine wave, square waves, saw-tooth wave, arbitrary wave (except DC)
Modulation source: internal/external
Polarity: positive and negative
Rate: 1mHz to 1MHz
ASK amplitude: 0% to 200%
FSK:
Carrier wave: sine wave, square waves, saw-tooth wave, arbitrary wave (except DC)
Modulation source: internal/external
Modulated wave: 50% duty cycle pulse wave
Polarity: positive and negative
Rate: 1mHz to 1MHz
Frequency hopping: 0.1Hz to 80MHz
PSK:
Carrier wave: sine wave, square waves, saw-tooth wave, arbitrary wave (except DC)
Modulation source: internal/external
Polarity: positive and negative
Rate: 1mHz to 1MHz
PSK phase: 0° to 360°
PWM:
Carrier wave: pulse wave
Wave inversion: regular and reverse
Pulse period: 0.01uS to 40S
Pulse width: 0.001uS to 4S
Burst:
Idle: zero position, positive maximum, negative maximum
Mode: single, automatic
Trigger source: manual burst, CH2 burst, external burst (AC), external burst (DC)
Pulse number: 1-1000000000
Modulation type: AM, FM, PM, ASK, FSK, PSK, PWM
AM:
Carrier wave: sine wave, square waves, saw-tooth wave, arbitrary wave (except DC)
Modulation source: internal/external
Modulated wave: sine wave, square waves, saw-tooth wave, noise wave, arbitrary wave
Modulation depth: 0% to 200%
Modulation frequency: 1mHz to 1MHz
FM:
Carrier wave: sine wave, square waves, saw-tooth wave, arbitrary wave (except DC)
Modulation source: internal/external
Modulated wave: sine wave, square waves, saw-tooth wave, noise wave, arbitrary wave
Modulation frequency: 1mHz to 1MHz
Frequency deviation: 0.1Hz to 10kHz
PM:
Carrier wave: sine wave, square waves, saw-tooth wave, arbitrary wave (except DC)
Modulation source: internal/external
Modulated wave: sine wave, square waves, saw-tooth wave, noise wave, arbitrary wave
Phase deviation: 0°to 360°
Modulation frequency: 1mHz to 1MHz
ASK:
Carrier wave: sine wave, square waves, saw-tooth wave, arbitrary wave (except DC)
Modulation source: internal/external
Polarity: positive and negative
Rate: 1mHz to 1MHz
ASK amplitude: 0% to 200%
FSK:
Carrier wave: sine wave, square waves, saw-tooth wave, arbitrary wave (except DC)
Modulation source: internal/external
Modulated wave: 50% duty cycle pulse wave
Polarity: positive and negative
Rate: 1mHz to 1MHz
Frequency hopping: 0.1Hz to 80MHz
PSK:
Carrier wave: sine wave, square waves, saw-tooth wave, arbitrary wave (except DC)
Modulation source: internal/external
Polarity: positive and negative
Rate: 1mHz to 1MHz
PSK phase: 0° to 360°
PWM:
Carrier wave: pulse wave
Wave inversion: regular and reverse
Pulse period: 0.01uS to 40S
Pulse width: 0.001uS to 4S
Burst:
Idle: zero position, positive maximum, negative maximum
Mode: single, automatic
Trigger source: manual burst, CH2 burst, external burst (AC), external burst (DC)
Pulse number: 1-1000000000
Measurement and counting function:
Measurement mode:
Measurement function: frequency, positive and negative pulse width, period, duty cycle
Coupling method: DC, AC
Gate time: 0.001S-10.000S
Measurement mode: low frequency, high frequency
Frequency measurement range: 1Hz~100MHz
Input signal amplitude range: 2Vpp~20Vpp
Period measurement: 10nS~4S
Pulse width: 4S
Duty cycle measurement range: 0.01%~99.99%
Counter mode:
Counter range: 0-4294967295
Coupling method: DC and AC coupling
Counting method: manual
External modulation input characteristics:
Input signal amplitude range: 0~3Vpp
Input signal frequency range: DC~200KHz
Scanning characteristics:
Sweep channel: CH1 or CH2
Carrier wave: sine wave, square waves, saw-tooth wave, arbitrary wave (except DC)
Sweep function: sweep frequency, sweep amplitude, sweep duty
Sweep mode: linear, logarithmic
Sweep direction: increment, decrement, round trip
Start/end frequency: consistent with the upper and lower limits of the corresponding carrier frequency
Start/end amplitude: consistent with the upper and lower limits of the corresponding carrier amplitude
Start/end duty cycle: consistent with the upper and lower limits of the corresponding carrier duty cycle
Sweep time: 0.01S-640S
Voltage control characteristics:
Voltage control channel: CH1 or CH2
Carrier wave: sine wave, square waves, saw-tooth wave, arbitrary wave (except DC)
Voltage-control function: frequency control, amplitude control, and duty cycle control
Sweep mode: linear, logarithmic
Start/end frequency: consistent with the upper and lower limits of the corresponding carrier frequency
Start/end amplitude: consistent with the upper and lower limits of the corresponding carrier amplitude
Start/end duty cycle: consistent with the upper and lower limits of the corresponding carrier duty cycle
Voltage-control voltage range: 0V-5V, starting point and end point can be set arbitrarily
Programming characteristics:
Running mode: debugging, normal
Storage: P00-P19
Programming number: 00-99
Programming time: single serial number programming time 0-99S
Measurement mode:
Measurement function: frequency, positive and negative pulse width, period, duty cycle
Coupling method: DC, AC
Gate time: 0.001S-10.000S
Measurement mode: low frequency, high frequency
Frequency measurement range: 1Hz~100MHz
Input signal amplitude range: 2Vpp~20Vpp
Period measurement: 10nS~4S
Pulse width: 4S
Duty cycle measurement range: 0.01%~99.99%
Counter mode:
Counter range: 0-4294967295
Coupling method: DC and AC coupling
Counting method: manual
External modulation input characteristics:
Input signal amplitude range: 0~3Vpp
Input signal frequency range: DC~200KHz
Scanning characteristics:
Sweep channel: CH1 or CH2
Carrier wave: sine wave, square waves, saw-tooth wave, arbitrary wave (except DC)
Sweep function: sweep frequency, sweep amplitude, sweep duty
Sweep mode: linear, logarithmic
Sweep direction: increment, decrement, round trip
Start/end frequency: consistent with the upper and lower limits of the corresponding carrier frequency
Start/end amplitude: consistent with the upper and lower limits of the corresponding carrier amplitude
Start/end duty cycle: consistent with the upper and lower limits of the corresponding carrier duty cycle
Sweep time: 0.01S-640S
Voltage control characteristics:
Voltage control channel: CH1 or CH2
Carrier wave: sine wave, square waves, saw-tooth wave, arbitrary wave (except DC)
Voltage-control function: frequency control, amplitude control, and duty cycle control
Sweep mode: linear, logarithmic
Start/end frequency: consistent with the upper and lower limits of the corresponding carrier frequency
Start/end amplitude: consistent with the upper and lower limits of the corresponding carrier amplitude
Start/end duty cycle: consistent with the upper and lower limits of the corresponding carrier duty cycle
Voltage-control voltage range: 0V-5V, starting point and end point can be set arbitrarily
Programming characteristics:
Running mode: debugging, normal
Storage: P00-P19
Programming number: 00-99
Programming time: single serial number programming time 0-99S
General specifications:
Display:
Screen: 3.5 inch TFT color LCD display
Resolution: 320*480
Color: 64K true color
Store and load:
Quantity: 100 groups
Location: 00 to 99 (The data of 00 storage location is loaded by default)
Interface:
Interface method: USB to serial interface
Extension interface: serial port with TTL level mode, convenient for secondary development
Communication rate: standard 115200BPS
Protocol: using the command line, the protocol is open
Power:
AC power: supply voltage: 85V-264V,47-63Hz
power consumption: less than 30W
fuse: 250VAC, 3.15A
DC power: supply voltage/current: DC5V±0.5V 3A
Environment:
Temperature: 0~40℃
Humidity: humidity<80%
Item size: 247 * 243 * 102mm / 9.7 * 9.6 * 4.0in
Item weight: 1030g / 2.3lb
Package size: 425 * 275 * 215mm / 16.7 * 10.8 * 8.5in
Package weight: 1985g / 4.4lb
Display:
Screen: 3.5 inch TFT color LCD display
Resolution: 320*480
Color: 64K true color
Store and load:
Quantity: 100 groups
Location: 00 to 99 (The data of 00 storage location is loaded by default)
Interface:
Interface method: USB to serial interface
Extension interface: serial port with TTL level mode, convenient for secondary development
Communication rate: standard 115200BPS
Protocol: using the command line, the protocol is open
Power:
AC power: supply voltage: 85V-264V,47-63Hz
power consumption: less than 30W
fuse: 250VAC, 3.15A
DC power: supply voltage/current: DC5V±0.5V 3A
Environment:
Temperature: 0~40℃
Humidity: humidity<80%
Item size: 247 * 243 * 102mm / 9.7 * 9.6 * 4.0in
Item weight: 1030g / 2.3lb
Package size: 425 * 275 * 215mm / 16.7 * 10.8 * 8.5in
Package weight: 1985g / 4.4lb
Package includes:
- 1 x Signal generator
- 1 x Power cord
- 1 x Q9-Q9 through line
- 1 x USB data cable
- 1 x Q9 clip line
- 1 x User Manual
Details pictures:
